Replacing The Fuses - UNI-T ut71c Operating Manual

Model UT71C/D/E: OPERATING MANUAL
B. Replac i n g the Fuses
Warnin g
To avoid elect r i c a l shoc k or arc blast, or persona l
injur y or damag e to the Meter, use specif i e d fuses
ONLY in acco rd a n c e wit h the follo w i n g proced u r e.
Follow Figure 6-1 and proceed as follows to replace
the Meter's fuse:
l Turn the rotary switch to OFF and remove all
connections from the terminals.
l Remove the 5 screws from the case bottom.
l Remove the fuse by gently prying one end loose,
then take out the fuse from its bracket.
l Install ONLY replacement fuses with the identical
type and specification as follows and make sure the
fuse is fixed firmly in the bracket.
Fuse 1: 0.5A, 250V, fast type fuse, 5×20mm
Fuse 2: 10A, 250V, fast type fuse, 5×20mm
l Rejoin the case bottom and case top, and install the
5 screws.
Replacement of the fuses is seldom required. Burning
of a fuse always results from improper operation.
Figure 6-1. Fuse Replacement
53