UNI-T ut71c Operating Manual page 19

Model UT71C/D/E: OPERATING MANUAL
But t o n
RECALL
Recall feature:
STORE
Recall the stored value. Press EXIT to exit the Recall feature. second
Setup feature:
In Setup, press to select OFF at the selection of HIGH and once after entering Setup mode.
LOW
Hold feature:
Peak HOLD
HOLD
Press HOLD to freeze the displayed value. Press EXIT to
release the display.
Peak Hold feature:
Press to access Peak Hold feature, the primary display second.
shows PEAK HOLD. Press EXIT to exit.
l In Setup, each press to select the digit you want to edit. Press the button once after entering
l In Recall, press to enable SEND feature
l In Store, press to toggle between clearing all the stored
reading or start storing reading from the current index number.
Table 2-2. Funct i o n a l But to n s
Descri p t i o n Acce ss Metho d
Press and hold the button for over 1
Press the button
Press the button once.
Press and hold the button for over 1
Setup or Recall or Store mode.
17