Kenwood KDWTTB10 Installation Instructions Manual page 6

installation
3. Do not connect the unit to the mains socket
before installation. Ensure you are not
installing the unit right in front of the mains
socket. This is to avoid potential damage to
the back of the unit.
After installing the appliance, ensure that
the mains plug is easily accessible.
4. The electrical connection conditions must
correspond with the specifications on the
rating plate of the dishwasher. Do not use
extension cables.
5. Position the unit next to a water tap and a
drain. Level the unit if needed.
6. Ensure the water inlet and drain hoses are
not kinked or squashed. The unit must not
stand on the electrical supply cable.
6
level
level