Specifications - Kenwood KDWTTB10 Installation Instructions Manual

specifications

Model
Dimensions
Capacity
Water Pressure Required
Power Consumption
Rated Voltage
Off Mode Power Consumption
Left-on Mode Power Consumption
Energy Efficiency Class
Annual Energy Consumption
Energy Consumption of the Standard Cleaning Cycle
Annual Water Consumption
Drying Efficiency Class
Standard Cleaning Cycle
Program Duration of the Standard Cleaning Cycle
Noise Level
Mounting
Could be built-in
Features and specifications are subject to change without prior notice.
Note:
1
1. A + + + (highest efficiency) to D (lowest efficiency)
2. Based on 280 standard cleaning cycles using cold water fill and the consumption of the low 2
power modes. Actual energy consumption will depend on how the appliance is used.
3. A (most efficient) to G (least efficient) 3
4
4. This is the program used for the Energy label information and is suitable for cleaning soiled
normally soiled tableware. It is the most efficient programme in terms of its combined energy
and water consumption for that type of tableware.
5
5. The device meets the European standards and the directives in the current version at delivery:
- LVD 2006/95/EC
- EMC2004/108/EC
- ERP 2009/125/EC
6
6. The above values have been measured in accordance with standards under specified operating
conditions. Results may vary greatly according to quantity and pollution of the dishes, water
hardness, amount of detergent, etc.
1
2
2
3
4
TE, Please help check!
KDWTTB10
550mm(W) x 500mm(D) x 438mm(H)
6 Place Settings
0.04 - 1.00MPa
1280W
230V~50Hz
1.2W
1.6W
A
190 kWh
0.65 kWh
2380 litres
B
ECO 55°C
170 min
55 dB(A) re 1 pW
Free standing
Yes
27