Table of Contents
Advertisement
5
Menu / (Pan/Tilt) - This button serves 2 functions:
a)
b)
6
Zoom / Main - This button serves 2 functions:
a)
1. Set the monitor to full screen mode for the desired channel
2. Press the Zoom button.
3. Use the up/down/left/right arrow keys to move the area which the monitor is
4. Press Zoom again to escape Zoom mode.
b)
7
Sequence / Sub1 - This button serves 2 functions:
a)
b)
8
VCR / Sub2 - This button serves 2 functions:
a)
VCR mode is only intended for VCR/DVR playback purposes, not for live viewing.
NOTE
b)
(PIP/POP) / P-SEQ - This button allows you to view the cameras in Picture-In-Picture or
9
Picture-On-Picture setting. PIP allows you to view two locations simultaneously,one being
the main channel, the other being viewed as a small image on the screen. Dual PIP can
also be selected, which displays two small images on the main screen. POP divides the
screen into 4 screens, with the main channel occupying two-thirds of the screen. Refer to
the diagrams below that illustrate the difference between PIP, Dual PIP, and POP. Press
the PIP/POP button to switch between the two functions. To change these settings, refer
to MAIN MENU CONTROL section.
Menu – Press this button to enter the menu option screen. For more
information on Menu mode, please refer to MAIN MENU CONTROL
section.
Pan/Tilt – This button activates the Pan/Tilt feature. For more
information on the Pan/Tilt Zoom feature please refer to MAIN MENU
CONTROL section.
Zoom - This monitor is equipped with 2 times Zoom. To utilize this
feature proceed as follows:
zooming in on.
Main – The second function of the Zoom/Main button is for use in the
PIP/POP mode. Refer to the PIP/POP section on the bottom of this
page for an explanation.
Sequence - used to sequence between all camera locations in Full
Screen in sequential order. The letters SEQ will appear in the on-screen
display during sequencing. To change Sequence settings, refer to item
#9 in the MAIN MENU CONTROL section. Press SEQ again to escape
sequencing mode.
Sub1 - Used in PIP/POP mode. Refer to PIP/POP explanation on the
next page.
VCR - This button will change the display from the camera inputs to the
VCR Audio/Video playback and recording signal. To return to the
previous screen, press VCR again.
Sub2 - Used in PIP/POP mode. Refer to PIP/POP explanation on the
next page.
- 5 -
Advertisement
Table of Contents
