Table of Contents
Advertisement
4
MONITOR CONTROLS – FRONT PANEL
1
Channel 1/5 – Channel 4/8 - These buttons perform the following functions:
a)
a)
b)
c)
d)
2
(Quad 1/2) / Enter - This button serves 2 functions:
a)
b)
3
FRZ ALL / ALRS - This button serves 2 functions:
a)
b)
4
Volume – These two buttons turn the Volume Up / Down.
1
2
3
4
Displays a picture in Full Screen. If you are in the Quad1 mode, select
the Channel 1/5 button and hold for 2-3 seconds to view Camera 1 in
Full Screen. To view other camera locations, press Ch 2/6, Ch 3/7, Ch
4/8 buttons.
Freezes a specific camera. You have the option to freeze images in Full
or Quad screen mode.
In Quad Screen mode: press a channel button to freeze this channel in
the
Quad screen; press again to unfreeze;
In Full Screen mode: press the current channel being viewed to freeze
it; press again to unfreeze.
Scrolls LEFT / UP / DOWN / RIGHT in Menu mode.
In Menu mode: These buttons are used to navigate through menu
options. For more information on Menu mode, please refer to MAIN
MENU CONTROL section.
Scrolls LEFT / UP / DOWN / RIGHT in Zoom mode.
MOVE / ZOOM / FOCUS in Pan Tilt mode. For more information on
Pan Tilt.
Quad 1/2- Pressing this button goes to Quad viewing mode (2 quad
viewing screens)
Enter – Confirms selection in the Menu mode
FRZ ALL (Freeze All) – Pressing this button Freezes the screen being
viewed. Pressing this button in Quad mode will freeze all four cameras.
An "F" will appear in the On-Screen Display.
ALRS (Alarm) – During an Alarm, this button will turn off the alarm
sound and set the system to the previous setting.
- 4 -
5
6 7 8
9
10 11 12
13
Advertisement
Table of Contents
