Table of Contents
Advertisement
SINGLE PIP
a)
b)
c)
You can program whether the Main picture or the Sub picture switches during PIP
NOTE
Sequencing via the Menu. Please refer to MAIN MENU CONTROL section for more
details
10
Audio Select – In Quad mode, the user can select the channel with audio. Pressing this
button automatically changes the audio from camera to camera.
11
Mute - This button mutes audio. Press the button again to turn the audio feature back on.
12
Talk - Press and hold this button to talk to a specific camera location. This button must be
pressed the entire time, while talking. To listen to the camera location release the Talk
button.
13
Standby Switch - This switch will turn the monitor ON/OFF. A red LED indicator light is
ON when the monitor is in Standby mode. Press the button to turn the power ON. Allow
for 5-7 seconds for the picture to appear.
To provide longer life to the CRT monitor, turn the Standby switch OFF when not in
NOTE
use. The system will continue to record images to VCR/DVR.
DUAL PIP
Main - Pressing the Main button while viewing PIP/Dual PIP/POP mode
will change the camera location of the main screen being displayed.
Sub1 & Sub2 - Pressing the Sub1/Sub2 buttons in PIP mode changes
one of the two camera locations being displayed as a picture in picture.
These buttons will also remove /add a sub-picture to create a Single PIP
/ Dual PIP viewing mode.
PIP Sequence – Holding this button for 3 seconds initiates Sequencing
in Single or Dual PIP mode. To exit PIP Sequencing, press the PIP/POP
button twice.
- 6 -
POP
Advertisement
Table of Contents
