Main Menu Control - Sylvania SY14Q6084CN Instruction Manual

5

MAIN MENU CONTROL

Enter the Menu screen by pressing the Menu button. Scroll through the eight options by pressing
the UP and DOWN buttons. To enter a sub-menu, press the Enter button where the highlighted
scroll bar is located. To exit the Main Menu, scroll down to the Exit option and press Enter. Note:
in submenus of the Main Menu, you can either exit Menu mode entirely by
selecting Exit, or you can return to the Main Menu by selecting Return.
1 Time / Date Set - This submenu allows you to change the Time and
Date displayed on the monitor, and also program how you'd like for the
information to appear in the on-screen display.
a)
b)
To avoid the VCR's Time/Date OSD to be overlapping during recording or VCR mode,
NOTE
please turn OFF the time/date display on your VCR/DVR
c)
d)
e)
2 Sequence Set - This menu allows you to select the time duration for each channel to
sequence between cameras. You have the option to change the
default 3 seconds to a value between 0-59 seconds.
Channels without a camera, a Video Loss, or a Dwell Time of zero
NOTE
will be skipped in sequencing.
3 PIP/POP Set - This sub-menu allows you to change the positioning of
PIP/ Dual PIP/POP screens on the monitor, as well as choosing how
PIP Sequencing works.
a)
b)
[00]
DISP MON: Selecting [Y] enables on screen display
of the date & time
Selecting [N] hides this information.
DISP REC: Selecting [Y] will cause the date & time info to be recorded
to tape.
Selecting [N] prevents will prevent the on-screen display from being
recorded.
TIME: Change the time (24 hour clock)
DATE: Change the date.
DATE FORMAT: There are three formats to display the date:
MM-DD-YYYY : for U.S.A.
YYYY-MM-DD : for Asian countries.
DD-MM-YYYY : for European countries.
PIP SEQUENCE: Selecting [SUB] (the default setting) causes the sub-
picture to rotate between cameras while the Main screen remains fixed
during PIP Sequencing.
Selecting [MAIN] will make the Main screen rotate while the sub-picture
remains fixed.
PIP POSITION: There are four positions in which the sub channels
can be set:
[01]
- 7 -
[02] [03]
[TIME / DATE SET]
DISP MON : [Y]
DISP REC : [Y]
TIME : 14:35:23
DATE : 02/18/2003
DATE FORMAT: MM-DD-YY
RETURN : [↲]
EXIT : [↲]
[PIP / POP SET]
PIP SEQUENCE: [SUB]
PIP POSITION : [01]
POP POSITION : [00]
RETURN : [↲]
EXIT : [↲]