Removing The Hall Sensor; Installing The Hall Sensor - Dell Latitude 6430u Owner's Manual

a. palmrest assembly
b. keyboard
c. base cover
d. SD card
e. battery
5. Follow the procedures in

Removing the Hall Sensor

1. Follow the procedures in
2. Remove:
a. battery
b. SD card
c. base cover
d. keyboard
e. palmrest assembly
3. Disconnect the hall-sensor cable and remove it from the routing channel.
4. Remove the screw that secures the hall sensor to the computer and remove it.

Installing the Hall Sensor

1. Place the hall sensor in its place on the computer.
2. Tighten the screw to secure the hall sensor to the computer.
3. Route and connect the hall-sensor cable.
4. Remove:
a. palmrest assembly
b. keyboard
c. base cover
d. SD card
e. battery
5. Follow the procedures in
32
After Working Inside Your Computer .
Before Working Inside Your Computer .
After Working Inside Your Computer .