Hall sensor daughter board
Removing the Hall sensor daughter board
Prerequisites
1. Follow the procedure in
2. Remove the
SIM
tray.
3. Remove the
display
assembly.
About this task
The following images indicate the location of the Hall sensor daughter board and provide a visual representation of the removal
procedure.
Steps
1. Disconnect the Hall sensor daughter board FPC from the connector on the system board.
2. Gently peel back the Hall sensor daughter board FPC from the battery .
3. Remove the single (M2x2) screw that secures the Hall sensor daughter board to the frame.
4. Lift the Hall sensor daughter board out of the computer.
Installing the Hall sensor daughter board
About this task
The following images indicate the location of the Hall sensor daughter board and provide a visual representation of the removal
procedure.
Before working inside your
computer.
Removing and installing components
43