Removing the Smart-Card Board
1.
Follow the procedures in
2.
Remove:
a. battery
b. SD card
c. base cover
d. keyboard
e. palmrest assembly
3.
Disconnect the smart-card cables from the computer.
4.
Remove the screws that secure the smart-card board in its place. Remove the smart-card cable from the routing
channel and remove the smart-card from the computer.
Installing the Smart-Card Board
1.
Route the smart-card cable and place the smart-card board in its slot in the computer.
2.
Tighten the screws to secure the smart-card board to the computer.
3.
Connect the smart-card cables to the computer.
4.
Install:
a. palmrest assembly
b. keyboard
c. base cover
d. SD card
e. battery
30
Before Working Inside Your Computer .