Pack The Machine And The Toner Cartridge Together - Brother MFC-L6750DW Online User's Manual

Home > Routine Maintenance
Together

Pack the Machine and the Toner Cartridge Together

WARNING
• To prevent possible injuries, at least two people should lift the product by holding it at the front and back.
• If the machine has the Optional Tray(s) installed, remove the Optional Tray(s) BEFORE moving the
machine. Attempting to move the machine without removing the Optional Tray(s) may cause injury to you
or damage to the machine.
• Pack the Optional Tray(s) separately in its original carton with original packing material.
• If for any reason you must ship your machine, carefully repack the machine in the original packaging to
avoid any damage during transit. The machine should be adequately insured with the carrier.
1. Press and hold
2. Disconnect all the cables, and then unplug the power cord from the AC power outlet.
The machine is equipped with a non-detachable AC power cord depending on the model.
3. Put the machine into the bag it originally came in.
4. Pack the machine, the printed materials, and the AC power cord (if applicable) in the original carton with the
original packing material as shown. If you are returning your machine to Brother as part of the Exchange
Service, pack only the machine. Keep all separate parts and printed materials to use with your "Exchange"
machine.
> Pack and Ship Your Machine
to turn off the machine. Leave the machine off for at least 10 minutes to cool down.
> Pack the Machine and the Toner Cartridge
591