Scan To Email Attachment - Brother MFC-L6750DW Online User's Manual

Home > Scan > Scan Using the Scan Button on Your Brother Machine

Scan to Email Attachment

Send a scanned document as an email attachment.
• Use the Scan button on the machine to make temporary changes to the scan settings. To make permanent
changes, use Brother's ControlCenter software.
• The Scan to Email feature does not support Webmail services. Use the Scan to Image or Scan to File feature
to scan a document or a picture, and then attach the scanned file to an email message.
The machine scans to your default email client.
1. Load your document.
2. Press
[Scan].
3. Swipe left or right to display
4. Press
[to E-mail].
The icon moves to the middle of the Touchscreen and is highlighted in blue.
5. Press
[to E-mail].
6. If the machine is connected over the network, swipe up or down or press a or b to display the computer
where you want to send data, and then press the computer name.
If the LCD prompts you to enter a PIN for the computer, enter the four-digit PIN on the LCD, and then press
[OK].
7. Do one of the following:
• To change the scan settings, press [Options], and then go to the next step.
• To use the default scan settings, press [Start].
The machine starts scanning. If you are using the machine's scanner glass, follow the Touchscreen
instructions to complete the scanning job.
To change scan settings, a computer with Brother's Control Center software installed must be connected to
the machine.
8. To scan both sides of the document (MFC-L6750DW/MFC-L6900DW):
• Press [2-sided Scan], and then select the document type.
[to E-mail].
> Scan to Email Attachment
101