Brother MFC-L6750DW Online User's Manual page 387

Home > Network > Advanced Network Features
Mail > Enable Receive Notification for TX Verification Mail
Enable Receive Notification for TX Verification Mail
1. Press [ ] [Settings] > [All Settings] > [Network] > [E-mail/IFAX] > [Setup Mail RX] >
[Notification].
2. Press one of the three possible settings:
Option
Receive
Notification On
Receive
Notification MDN
Receive
Notification Off
• To send TX Verification Mail, the Sender must configure these settings:
- Switch [Notification] in [Setup Mail TX] to [On].
- Switch [Header] in [Setup Mail RX] to [All] or [Subject+From+To].
• To receive TX Verification Mail, the Receiver must configure these settings:
- Switch [Notification] in [Setup Mail RX] to [On].
3. Press .
Related Information
• Internet Fax (I-Fax) Verification Mail
Description
When Receive Notification is On, a template is sent back to the sender to indicate
successful reception and processing of the message.
These templates depend on the operation requested by the sender.
Example:
SUCCESS: Received From <Mail Address>
When Receive Notification is MDN, a report to indicate successful reception and
processing is sent back to the sender if the originating station sent a request
confirmation to the MDN (Message Disposition Notification) field.
When Receive Notification is Off, all forms of receive notification are disabled and no
message is sent back to the sender regardless of the request.
> I-Fax Options > Internet Fax (I-Fax) Verification
380