Programmed Cooking - Ariston FD771P Instructions For Installation And Use Manual

Display for all functions :
time, timer, length and end-of-
cooking or self-cleaning time
Indicator
for the buzzer
Key
for the buzzer
Key
to display the length
of cooking
Key
to display the end-of-
cooking time
These functions are set by using four keys (pressing them) and the knob
(turning it), the four keys only work together with the knob.
The "24 hour" electronic programmer enables you, at the
chosen time, to program the end and the length of a cook-
ing cycle within a time range between now and a waiting
period of 24 hours.
You can check the end-of-cooking time
cooking and the timer
mer knob and selecting the appropriate symbol.
· Time set: press both keys
and turn the knob until you get the right time.
· Buzzer timer: to use the buzzer timer incorporated in
the oven, press the key
display the time you want. Once you release the key, the
time begins to run (the time reappears on the display).
At the end of the time set, a buzzer sounds. To stop it,
press any of the four keys. The timer is independent of
the operation of the oven.
1 - Instant start
The oven starts at once and stops heating automati-
cally at the end of the period programmed.
- set the function selector to the position chosen.
- set the temperature selector to the desired
temperature.
- display the cooking time with the key
ting knob.
The AUTO and indicators are on, the display shows
the time.
When the time has elapsed, the indicator
the AUTO indicator flashes and a buzzer sounds.
To stop it, press the key
back to "0".
The programmer
for a programmed operation :
- on : operation in progress
- off : operation ended
1 2 . 3 0
, the length of
by rotating just the program-
and at the same time
while turning the knob

Programmed cooking

and the set-
goes off;
and set the function selector
Programming AUTO indicator :
Indicator
- on : manual use
- off : operation ended
- flashing : programmed operation
done
A
U
T
O
Key
manual back key :
- to turn the AUTO indicator off
- for manual cooking
Cooking without the programmer (manual mode)
- press the key
- set the function selector to the chosen cooking mode.
- set the temperature selector to the desired temperature
: the oven heats up at once, the heating indicator
on, then goes off each time the temperature is reached.
- Remember to turn the oven off (by setting the function
selector to "0") when the cooking is finished.
to
2 - Delayed start
The programmer automatically determines the start-
of-cooking time in accordance with the displays and
the oven stops heating at the end-of-cooking time
chosen.
You then:
– Check the clock is at the correct time.
– Display the end-of-cooking time: e.g. 12h30, press
the key while turning the knob
- Display the length of cooking: e.g. 50', press the key
while turning the knob
period, the AUTO indicator is on, the indicator
the display shows the time.
- Set the function selector to the function chosen.
- Set the temperature selector to the desired
temperature.
27
Knob
is used to change the various
settings : time set, timer,
length and end-time of a cycle
to increase numbers
to decrease numbers
if the AUTO indicator is flashing
.
. During the waiting
comes
is off,
GB