Furuno FCV-1900/B/G Installation Manual page 28

3. INITIAL SETTINGS
6. Select [Connected] at [HF Connection].
7. Select a frequency from the [Freq.] menu.
8. Select a transducer type from the [Transducer] menu.
[Tx power] and [Voltage] are set automatically.
9. Set the LF transducer similarly.
10. If a network sounder is connected, rotate the ENTER knob to select [DFF1/DFF3/
BBDS1 Transducer].
11. If a telesounder is connected, set [Telesounder Connection] to [On].
12. If a net sonde is connected, set [Net sonde] to [On].
13. After completion of setting, rotate the ENTER knob to select [Save Setting], then
push the knob. Select [Yes] and push the knob to apply the settings.
Transducer lists
The table below lists the narrow band transducers which are compatible with the FCV-
1900. Select the appropriate setting. For external sounders, select the transducers
connected to the external sounder.
Output
power (kW)
1
2
Frequency
Model
(kHz)
28 28F-8
50 50B-6
50B-6B
50B-9B
50/200 50/200-1T
68 68F-8H
200 200B-5S
28 28BL-6HR
38 38BL-9HR
50 50BL-12HR
82 82B-35H
82R-35R
88 88B-10
200 200B-8/8B
21
Remarks
™
ACCU-FISH compatible