Worx WU507 Manual page 5

Accessories
1 x blade for steel
• WU507 2 x 2.6Ah Ni-MH battery pack (WA3313)
1 x 1hr intelligent charger (WA3815)
•
WU507.9
We recommend that you purchase your accessories from the same
store that sold you the tool. Use good quality accessories marked with
a well-known brand name. Choose the type according to the work
you intend to undertake. Refer to the accessory packaging for further
details. Store personnel can assist you and offer advice.
------------
5
Additional safety points for your
cordless reciprocating saw
1
Remove the battery pack from the saw before carrying out
adjustments.
2 Do not expose to rain or water.
3
Charger is for indoor use only.
4 Do not store the battery pack in temperatures over 40
5 Always charge the battery pack between temperatures 0
Ideal charging temperature is 18
6 Only use the charger and the battery pack provided, no others.
7 Avoid short circuit of the battery pack connections (screws & nails).
8
Do not incinerate or burn the battery pack, it may explode.
9 Do not charge a damaged battery pack.
10 Do not charge non-rechargeable batteries.
11
Replace any damaged supply cords on your charger in an approved
service centre.
12 Always disconnect the charger power supply before making or
breaking the connections to the battery pack.
13 Battery pack and charger will be warm during charging, this is normal.
14 When not in use, remove a charged battery pack from the charger.
15
Always remove the battery pack from the charger immediately after
re-charging is completed.
16 Your saw and battery pack will be warm when working, this is normal.
17 Remove the plug from the socket before carrying out any adjustment,
servicing or maintenance.
18 Fully unwind cable drum extensions to avoid potential overheating.
19 When an extension cable is required you must ensure it has the
correct ampere rating for your power tool and is in a safe electrical
C.
o
C to 30 oC.
o
C - 24 C.
o o