Display And Delete Measured Values - Sanitas SBM 37 Instructions For Use Manual

7. Display and delete measured values

The results of every successful measurement are stored
together with the date and time. The oldest measurement
is overwritten in the event of more than 60 measure-
ments.
• Select the desired user memory (
M2 memory buttons if the device is switched off.
– To view the measurement data for user memory ,
press the M1 memory button.
– To view the measurement data for user
memory , press the M2 memory button.
The average of all measurements appears
on the display.
If Bluetooth is activated (the
®
flashes on the display), the blood pressure
monitor attempts to connect to the app. If
you press the M1 button in the meantime,
the transfer is cancelled and the average
values are displayed. If you press the M2
button, the transfer is cancelled and the
measurement data of user memory
is displayed. The
shown. The buttons are deactivated as
soon as a connection is established and the
data is transferred.
) with the M1 or
symbol
symbol is no longer
Press the M1 button if you have selected
user memory 1.
Press the M2 memory button if you have
selected user memory 2.
A flashes on the display.
The average value of all saved measured
values in this user memory is displayed.
• Press the relevant memory button (M1 or M2).
AM flashes on the display.
The average value of the morning measure-
ments for the last 7 days is displayed (mor-
ning: 5.00 a.m. – 9.00 a.m.).
Press the relevant memory button (M1 or M2).
PM flashes on the display.
The average value of the evening measure-
ments for the last 7 days is displayed (eve-
ning: 6.00 p.m. – 8.00 p.m.).
27