Getting To Know Your Device; Important Notes; Instructions For Use - Sanitas SBM 37 Instructions For Use Manual

Please read these instructions for use carefully and keep them
for later use, be sure to make them accessible to other users
and observe the information they contain.

1. Getting to know your device

Check that the packaging of the Sanitas SBM 37 blood pres-
sure monitor has not been tampered with and make sure that
the required contents are present. Before use, ensure that
there is no visible damage to the device or accessories and
that all packaging material has been removed. If you have any
doubts, do not use the device and contact your retailer or the
specified Customer Services address.
The upper arm blood pressure monitor is used to carry out
non-invasive measurement and monitoring of the arterial blood
pressure values in adults.
This allows you to quickly and easily measure your blood pres-
sure, save the measured values and display the development
and average values of the measured values taken.
You are also warned of possible existing cardiac arrhythmia.
The recorded values are classified and evaluated graphically.
Store these instructions for use for future reference and make
them accessible to other users.
ENGLISH

2. Important notes

Signs and symbols
The following symbols are used in these instructions for use,
on the packaging and on the type plate for the device and the
accessories:
17
Attention
Note
Note on important information
Observe the instructions for use
Application part, type BF
Direct current
Disposal in accordance with the Waste Elec-
trical and Electronic Equipment EC Directive
– WEEE
Manufacturer