Display And Delete Measured Values - Sanitas MD4300 User Manual

make-up, excess stimulants, stress or lack of sleep. Irregular
heartbeat can only be determined through an examination by
your doctor. If the symbol
the measure-ment has been taken, repeat the measurement.
Please ensure that you rest for 5 minutes beforehand and do
not speak or move during the measurement. If the symbol
appears frequently, please consult your doctor.
Self-diagnosis and treatment based on the measurements can
be dangerous. Always follow your GP's instructions.
Classi cation of measurements:
The measurements can be classi ed and evaluated in accord-
ance with the following table.
However, these standard values serve only as a general guide-
line, as the individual blood pressure varies in different people
and different age groups etc.
It is important to consult your doctor regularly for advice. Your
doctor will tell you your individual values for normal blood
pressure as well as the value above which your blood pressure
is classi ed as dangerous.
The classi cation on the display and the scale on the unit show
which category the recorded blood pressure values fall into. If
the values of systole and diastole fall into two different cate-
gories (e.g. systole in the ‚High normal' category and diastole
in the ‚Normal' category), the graphical classi cation on the de-
vice always shows the higher category; for the example given
this would be ‚High normal'.
is shown on the display after
Blood pressure Systole
value category (in mmHg)
Setting 3:
severe hyper - ≥ 180
tension
Setting 2:
moderate hyper - 160 – 179
tension
Setting 1:
mild hyper - 140 – 159
tension
High normal 130 – 139
Normal 120 – 129
Optimal < 120
Source: WHO, 1999 (World Health Organization)

7. Display and delete measured values

The results of every successful measurement are stored
together with the date and time. The oldest measurement
is overwritten in the event of more than 60 measure-
ments.
• Select the desired user memory (
M2 memory buttons if the device is switched off.
• To view the measurement data for user memory ,
press the M1 memory button.
Diastole
Action
(in mmHg)
seek medical
≥ 110
attention
seek medical
100 – 109
attention
regular monitoring
90 – 99
by doctor
regular monitoring
85 – 89
by doctor
80 – 84 self-monitoring
< 80 self-monitoring
) with the M1 or