Panasonic KX-NT543 Quick Reference Manual page 11

A LCD (Liquid Crystal Display):
KX-NT543: 3 lines, KX-NT546: 6 lines, KX-NT560: 4.4-inch
B Soft Buttons (S1-S4): S1-S4 (located from left to right) are
used to select the item displayed on the bottom line of the
display.
C Navigator Key: Used to adjust the volume and the display
contrast or select desired items.
D ENTER: Used to assign the selected item.
E Message/Ringer Lamp: When you receive an intercom call,
the lamp flashes green, and on an outside call, the lamp
flashes red. When someone has left you a message, the lamp
stays on red.
F Handset Hook: Keeps the handset stable when the unit is
mounted on a wall.
G EHS (Electronics Hook Switch) Jack
H Headset Jack
I (MESSAGE): Used to leave a message waiting indication
or call back the party who left the message waiting indication.
J (PAUSE): Used to insert a pause when storing a telephone
number. This button is also used for programming this unit.
K (FLASH/RECALL): Used to disconnect the current call and
make another call without hanging up.
L (REDIAL): Used to redial the last dialled number.
M (AUTO ANS/MUTE): Used to receive an incoming call in
hands-free mode or mute the microphone/handset during a
conversation.
N
(CONF): Used to establish a multiple party conversation.
O (TRANSFER): Used to transfer a call to another party.
P
(AUTO DIAL/STORE): Used for System/Personal
Speed Dialling or storing programme changes.
Q (FWD/DND): Used to switch Call Forwarding or Do Not
Disturb on your extension.
Location of Controls
11