Finishing Work; Operating The Vacuum Cleaner; Connect Accessories; Starting Work - Kärcher A 2801 Manual

For dry vacuuming:
Insert the paper filter bag.
Information: Coarse, dry dirt can also be vacuumed
up without the paper filter bag.
Place the motor housing on the dirt container
and close both fasteners.

Connect accessories.

Insert the suction hose into the connection on
the unit. The suction hose "clicks" into position.
Connect the telescopic suction tube to the
suction hose.
Information: You can vacuum in a comfortable,
upright posture by setting the telescopic suction pipe
to suit your height.
To adjust the length, unscrew the locking ring
and extend the inner tube to the desired
length, then retighten the locking ring.
Connect the floor nozzle to the suction tube.
Note: You can use the other accessories according to
their application. For normal use the crevice tool is
connected directly to the curved handle.

Operating the vacuum cleaner

Starting work

Check that the paper filter bag and the dirt
container are not yet full.
Pull the mains cable out of the cable take-up in
the unit (1) and insert the plug into a socket.
Switch the unit on (2.) when you want to start
work.
The floor tool or the dry-vacuuming tool can be
adjusted with your foot for vacuuming hard
floors or carpets.

Finishing work

Switch the machine off.
Pull out the mains cable.
Information: Pull out the mains cable by the plug.
Never tug the cable.
Press the cable take-up button, the mains
cable is automatically wound up.
If required, replace the paper filter bag or
empty the dirt container.
English 11