Description/ Scope Of Delivery; Field Of Application - WAGNER WallPerfect Flexio 580 I-Spray Manual

Flexio 585 I-Spray
•
The units may only be used with a functional valve.
hose (fig. 1, item 14) do not operate the unit further! Dismantle and clean the
ventilating hose, valve and diaphragm and replace the diaphragm if necessary.
•
Do not lay the spray gun.
•
The device is equipped with a thermal release which disconnects the device in case of
overheating. In this case, turn off the device, remove the plug and let the device cool
down for at least 1/2 hour. Eliminate the cause of heating, e.g. soiled air filter, slots for
air intake covered.
With original WAGner accessories and spare parts, you have the guarantee that
all safety regulations are fulfilled.

4. Description/ Scope of delivery

1) Air cap
3) Spray jet adjustment ring
5) WallPerfect I-Spray spray attachment
7) Air volume control
9) Air filter cover (right + left)
11) Mains lead
13) Valve
15) Stirring rod
17) Practice poster
19) PerfectSpray 800 spray attachment
21) Lubricating grease*
* This is inside the container: remove it before starting operations!

5. field of application

Many different coating substances can be processed with the Flexio 585.
A different spray attachment must be used, depending on the coating substance:
Coating Materials
Low-viscosity coating substances:
Water- and solvent-based paints, finishes,
primers, 2-component paints, clear
finishes, automotive finishes, staining
sealers and wood sealer-preservatives.
All coating materials with the red Perfect
Spray logo
Description/ Scope of delivery (fig. 1)
if paints rises in the ventilating
2) Nozzle
4) Union nut
6) Trigger
8) Spray gun rear part
10) Material volume adjustment
12) Container
14) Ventilating hose
16) Feed hopper (2 pcs.)
18) Replacement air filter (2 pcs.)
20) Replacement nozzle seal*
Spray attachment
Perfect Spray (anthracite)
GB
25