Timing options
Once you have stopped timing an event (using lap or split), you have the option to
save the information, reset the stopwatch, or continue timing (split timing only).
While stopwatch is running, press
•
saves the current timing data. Enter a name, and press
Save
•
clears the current timing data and resets the timer.
Reset
•
restarts the split timer from the point the timer was stopped.
Start
Lap timing
The lap time function allows you to measure the amount of time it takes to
complete a cycle or lap. To measure lap time:
Select
>
Organizer
Stopwatch
The running time appears on the display.
Once the lap timer has started, you can:
• Press
to stop the timer and view the elapsed time.
Stop
• Press
to display the lap time; the timer restarts from zero.
Lap
If you continue pressing
of lap times. You can scroll to review previous times.
Press
to stop the timer. The final lap time is displayed.
Stop
Stopwatch options
You can choose the following options from the
Option
Description
Continue
Redisplays the active timer (for example, if you receive a call while
the timer is still running).
Show last time Allows you to view the last measured time.
View times
Allows you to view the list of saved times.
Delete times
Allows you to delete the saved times. You can delete the saved times
one by one or all at once.
Note:
If you receive a call while using the stopwatch, the timer continues running in the
background. After ending the call, you can redisplay the timer by doing the following:
Press
>
Menu
Organizer
>
Stop
Options
>
>
Lap timing
, the most recent lap time appears at the top of the list
Lap
>
>
Stopwatch
Continue
[ 71 ]
and select one of the following:
OK
.
Start
menu:
Stopwatch
. Press
.
Select
Organizer
.