Table of Contents
Advertisement
microphone.
If the voice tag is not recognized by the phone or if you fail to speak a tag within three
seconds after the tone, the message Name not recognized is displayed, and you are returned
to the start screen.
When the voice tag is recognized,
3
The phone book entry will be displayed on the screen for three seconds
AND
The voice tag is replayed (through the ear piece).
After three seconds, the number is dialed.
The only other option for initiating voice dialing is to press the headset button
momentarily at the start screen. The alert tones play through the headset.
Speak the voice tag into the headset microphone. The voice tag will playback
through the headset to confirm your choice.
Voice tags
You can listen to an existing voice tag (in case you forgot what you recorded),
rerecord a voice tag, or delete an existing tag.
At the start screen, select
1
This option displays a list of only those contacts and numbers that have been assigned a
voice tag.
Scroll to the phone number voice tag you want to edit, and press
2
Scroll to either
3
4
If you choose Change, press Start to begin rerecording.
The new tag that is recorded replaces the old information.
• 1-TOUCH DIALING
When a phone number is assigned to one of the 1-touch dialing locations (2—9),
you can call the phone number in either of the following ways:
• Press the number key that corresponds to a 1-touch dialing location and press the
key.
Send
• Press and hold the number key that corresponds to a 1-touch dialing location until
the call is initiated.
The 1 key is preassigned to dial your voice mailbox number and cannot be
reassigned.
Contacts
,
, or
Playback
Change
[ 57 ]
>
.
Voice tags
.
Delete
Advanced features
.
Options
Advertisement
Table of Contents
