Security And System Settings; Lock Keypad (Keyguard); Security Code - Nokia 2272 User Manual

12 Security and System settings

Warning!
phone use is prohibited or when it may cause interference
or danger.
Your phone has a variety of security features that help
prevent some of the following:
• Placing accidental or unintentional calls
• Unauthorized use of your phone
• Placing and accepting calls from certain phone numbers
• Accidental erasing of information or restoring factory settings

• LOCK KEYPAD (KEYGUARD)

With keypad lock (Keyguard) you can temporarily lock your phone keypad and
prevent the accidental placing of calls or pressing of the keypad (for example, when
the phone is in your pocket or in your purse).
Press >
Menu Keyguard
(within 3 seconds), to activate Keyguard. It is possible to answer a call, even
*/+
though Keyguard is activated. Press the
has ended, the keypad remains locked.
Press , followed by
Unlock
your phone keypad.
Important:
labeled Unlock.
Important:
programmed into your phone (for example, 911).

• SECURITY CODE

Your phone prompts you for a five-digit
commands. Access is granted only after the correct security code has been entered
successfully.
The default security code is 12345. It is recommended that you change this code
at once, write it down, and store it in a safe place away from your phone.
You can delete the last entered digit by pressing
to delete all the digits more quickly). Enter the correct code or press
Clear
If you enter an incorrect security code,
and your phone will not accept any entries for the next five minutes.
Do not switch on the phone when wireless
, to activate Keyguard. You can also press
(within 3 seconds), to deactivate Keyguard and unlock
*/+
appears at the top of the display. The left softkey is also
When the phone is locked, calls may be possible to the emergency number
key to answer the call. When the call
Send
for certain features and
security code
(or by pressing and holding
Clear
will appear five times in a row,
Code error
[ 63 ]
Security and System settings
, followed by
Menu
to exit.
Back