Care Of Your Steam Mop - Shark S3455 Series Owner's Manual

Care of Your Steam Mop

fig. 13
fig. 14
AFTER USE AND STORAGE
1
When you have finished using the steam mop,
press the STEAM CONTROL button until the LED
light turns flashing BLUE. This stops the unit from
steaming. Unplug the cord from the outlet and
place the mop into the upright position. Let the
unit cool for 2-3 minutes.
Remove the cleaning pocket by releasing the
quick fasteners and using the lavender loop on
the side of the pocket, avoiding contact with the
hot pocket or dirt. (fig. 13)
8 TOLL FREE: 1-800-798-7398
2 Empty the water tank before storage. Open the
water tank door and empty the tank over a sink.
Close the water cap. (fig. 14)
3 To store the Shark
Pocket Mop hanging up, first remove the
®
head (after it has cooled and the steam has been
released) then hang on a large hook. (fig. 15)
fig. 15
Slim Professional Steam
®