Using Your Carpet Glider - Shark S3455 Series Owner's Manual

fig. 10
5 When one side of the cleaning pocket gets
dirty, just flip the mop and you can quickly start
using the other side. Use the shaggy side of the
cleaning pockets to lift up and lock away all the
dirt and debris and the scrubbing side to break
up the tough stain. (fig. 10)
6 When the water tank is empty, the steam mop
will stop producing steam. You can refill the
water tank at any time as long as the mop is
unplugged from the outlet. Reference the filling
instructions from page 4.
NOTE: Please wait 2-3 minutes for the Steam
Mop to cool off before removing the mop head
or the cleaning pocket. Never leave the steam
mop with a damp/wet cleaning pocket on any
floor.

Using Your Carpet Glider

The Steam Mop will not clean your carpeting or
area rugs. However, it is great for grooming and
freshening.
THE CARPET GLIDER
1 The Carpet Glider can be used with the All-
Purpose Head to lightly steam your carpet and
area rugs. Just place the mop head with the
cleaning pocket attached into the glider. The
recommended steam setting is HIGH when using
the Carpet Glider. (fig. 11)
2 Move the Steam Mop back and forth across a
section of the carpet. (fig. 12)
www.sharkninjamanuals.com
fig. 11
fig. 12
7