Using Your Steam Mop - Shark S3455 Series Owner's Manual

Using Your Steam Mop

IMPORTANT: Do not use the mop without
attaching a cleaning pocket and adding water
to the tank first. When you are using the mop
for the first time, it might take longer than the
normal 30 seconds to start steaming.
IMPORTANT: Sweep or vacuum your floors
prior to cleaning with your Steam Mop.
fig. 6
1 Pull and twist the quick release cord holder to
unwrap the power cord completely. Plug into an
electrical outlet. (fig. 6)
2 The STEAM CONTROL button will flash blue.
If the light does not turn on, reference the
troubleshooting section on page 10. (fig. 7)
www.sharkninjamanuals.com
fig. 7
5