Installing The Expansion Card; Removing The Power Supply Unit (Psu) - Dell Vostro 3650 Owner's Manual

Installing the Expansion Card

1. Insert the expansion card to its connector on the system board.
2. Secure the expansion card by pushing the card-retention latch until it snaps into place.
3. Push the metal tab until it snaps in place to secure the expansion card.
4. Close the front-bezel door.
5. Install the:
a. bezel
b. cover
6. Follow the procedures in

Removing the Power Supply Unit (PSU)

1. Follow the procedures in
2. Remove the:
• cover
• bezel
3. Open the front-bezel
4. Perform the following steps to remove the PSU from the computer:
a. Disconnect the PSU cables from the connectors on the system board [1, 2].
b. Unroute the PSU cables from the holder.
c. Remove the screws that secure the PSU to the computer [3].
d. Slide and lift the PSU to remove it from the computer [4].
After Working Inside Your
Before Working Inside Your
door.
Computer.
Computer.
15