Table of Contents
Advertisement
c. Slide the system fan to remove it from the computer [3].
Installing the System Fan
1.
Place the system fan on the computer.
2.
Tighten the screws to secure the system fan to the computer.
3.
Connect the system-fan cable to the connector on the system board.
4.
Close the front-bezel door.
5.
Install the:
a.
bezel
b.
cover
6.
Follow the procedures in
Removing the System Board
1.
Follow the procedures in
2.
Remove the:
•
cover
•
bezel
3.
Open the
front-bezel
4.
Remove the:
•
heatsink module
•
processor
•
expansion card
•
memory
•
WLAN card
5.
Disconnect all the cables from the connectors on the system board.
6.
Perform the following steps to remove the system board from the computer:
a. Remove the screws that secure the system board to the computer [1].
b. Slide and lift the system board to remove it from the computer [2].
20
After Working Inside Your
Before Working Inside Your
door.
Computer.
Computer.
Advertisement
Table of Contents
