Initial Pairing; Charging; Setup With Handifox - Opticon OPN2002 User Manual

INITIAL PAIRING. Turn on the Bluetooth wireless on your device, and make it visible for
pairing. Press and hold the small Clear/Function button on the face of the device until
the blue light starts flashing rapidly. Your device should find the scanner and ask for the
PIN code, which you will enter (0000).
Note: the barcode below can be scanned to make the scanner both visible for pairing
and also connectable for HandiFox, eliminating the need to press the small button.
CHARGING. Charge the OPN2002 by using a USB charging cable connected to a PC or
other USB charging power supply. You should charge it every day to ensure reliable
operation.

SETUP WITH HANDIFOX.

Turn on the Bluetooth on the device. Open HandiFox, log in, and then navigate to
Admin/Settings/Select Scanner. Tap the Scan Bluetooth button and you should see
Tap Save.
The scanner and device will then be paired.
You will need to setup the OPN2002 for use with HandiFox.
Tap Select to
see.
Address may be
different.