Ricoh SP 3510SF Quick Manual page 4

CONTROL PANEL
10.Scroll keys
Press to move the cursor in the directions indicated by each scroll key.
Pressing the < > keys while the machine is in standby mode will display the menu for configuring the
settings of the machine's current operation mode (copier, scanner, or fax).
11.Number keys
Use to enter numerical values when specifying settings such as fax numbers and copy quantities, or
enter letters when specifying names.
12.[Clear/Stop] key

While the machine is processing a job: cancel the current job.

While configuring the machine: cancel the current setting and return to standby mode.

While in standby mode: cancel temporary settings such as image density or resolution.
13.[Start] key
Press to scan, copy, or send a fax.
14.[OK] key
Press to confirm settings or enter the next level of the menu tree.
15.[Escape] key
Press to cancel the last operation or exit to the previous level of the menu tree.
16.Alert indicator
Flashes yellow when the machine will require maintenance soon (such as replacing a print cartridge),
or lights up red when a machine error occurs.Check the messages on the screen and follow the
instructions as provided in "Error and Status Messages on the Screen".
17.Selection keys
Press the key that corresponds to an item shown on the bottom line of the screen to select it.
18.Power indicator
Remains lit while the power is on. It is unlit when the power is off.
19.[Facsimile] key
Press to switch to fax mode. The key stays lit while the machine is in fax mode.
20.[Scanner] key
Press to switch to scanner mode. The key stays lit while the machine is in scanner mode.
21.[Density] key
Press to adjust image density for the current job.
22.[Reduce/Enlarge] key

Copier mode: press to specify the reduction or enlargement ratio for the current job.

Scanner mode: press to specify the scanning size according to the current original.
23.[Shift] key
Press to use the Quick Dial numbers 11 to 20 when specifying a scan or fax destination using the
One Touch buttons.
24.One Touch buttons
Press to select a scan or fax Quick Dial destination.