Furuno FELCOM 19 Installation Manual page 22

3. INITIAL SETTINGS
10. Select [Window Color] then press the Enter key.
11. Set the window colors as follows:
1) [Select Preset] provides three preconfigured window color sets. Use one of
these sets, or continue this procedure to customize window colors.
2) Select [Window]. Use
or.
Base Window: Standby display
RCV Message Display: Receive message display
EGC Message Display: EGC message display
EDIT1 - EDIT2: Editor screens 1 and 2
Function: Menu
Sub Menu 1 - Sub Menu 4: Sub menus 1-4
Message: Status message
3-6
Window Color
Select Preset 1 2 3
Load Default
- - - - - - - - - - - - - - - - - - - - - - -
Edit Color
Window [ Base Window
Fore Color [ L-WHITE
Back Color [ BLUE
- - - - - - - - - - - - - - - - - - - - - - -
To Change: ENTER To Change Value:L<=>R
or key to select the window for which to select col-
]
]
]