Emptying The Drip Tray And Coffee Grounds Container - Melitta CaffeO Passione Operating Instructions Manual

Basic operation
4.8

Emptying the drip tray and coffee grounds container

After several beverage dispensing processes, the drip tray (6) and the coffee
grounds container (5) can become full and must be emptied. The projecting
float (16) indicates the current filling level of the drip tray.
After a specified number of beverage have been dispensed, the appliance
also shows that the drip tray and coffee grounds container are full.
Always empty the drip tray and coffee grounds container.
16
Fig. 11: Emptying the drip tray and coffee grounds container (Caffeo® Vari-
anza® CS)
1. Pull the drip tray (6) forwards out of the appliance.
2. Remove the coffee grounds container (5) and empty it.
3. Empty the drip tray.
4. Insert the coffee grounds container.
5. Push the drip tray into the appliance up to the stop.
Information
If you empty the drip tray and the coffee grounds container while the appli-
ance is switched off, the appliance does not register this process. Therefore,
it is possible that you are requested to empty the containers although the
drip tray and the coffee grounds container are not yet full.
74
5
6