3. Starting from the right side of the junction box, fix the cables by CSK clamp,
pass them through cable clamps and connect XH connectors to the MTC
board.
Cable clamp
CKS clamp
Transducer cable
(10S2140/10S2141)
4. Fasten the shield part of the cable with metal clamp.
5. Fasten the fixing plates.
2-18
Junction box, cover removed, front view
Junction box, cover removed, front view
Note: Capacitors not present
on latest version of
MTC board.
Note: Capacitors not present
on latest version of
MTC board.
Signal cables from
transceiver unit
(10S2138/10S2139)