Table of Contents
Advertisement
Solder lead wire to armor and
connect it to #1 pin of connector.
2.4.3
Monitor cable (10S2074 or 10S2075)
Connect the monitor cable 10S2074 or 10S2075 (from the monitor unit) to the
connectors in the processor unit shown below.
38P connector:
D-sub 25 pin:
D-sub 15 pin:
2.4.4
Control cable
For blackbox type, attach the control cable (10S2076) to the CN-A103 connector
in the processor unit. The control unit for the sub-display unit should be
connected to the CN-A108 connector.
2-10
Armor
Vinyl sheath
Taping
Use cable DPYCY-1.5
(Japan standard cable)
or equivalent cable.
Assembling connector NCS-253-P
CN-A103 (For the optional sub-display, CN-A108)
CN-A102 (For the optional sub-display, CN-A107)
CN-A104 (For the optional sub-display, CN-A109)
Cable DPYCY-1.5
Vinyl
sheath
Conductor
2
S = 1.5 mm
∅
= 1.56 mm
Armor
Advertisement
Table of Contents
