Installing/Removing The Slicing Disc; Adjusting The Slicing Thickness - KitchenAid 5KFP1644 Instruction Manual

usIng Your AccessorIes

Installing/removing the slicing disc

Place the disc on the power shaft.
1
Install the lid, aligning the tabs and
3
locking it into place.

Adjusting the slicing thickness

note: This lever only works with the
adjustable slicing disc. Changing thickness
settings with other discs or blades installed
will have no effect on operation.
In addition to the position of the lever, it
is possible to change the thickness of your
slices by changing pressure on the food
item when guiding it into the feed tube.
Use more pressure for a thicker slice, or
use less pressure for a thinner slice.
IMPortAnt: Discs and adapters must be removed before removing bowls.
W10547908A_Translation.indd 19
Slightly rotate the disc until it drops
2
into place.
Finger grip
To remove slicing disc, remove lid and
4
using the 2 finger grips, lift the disc
straight up.
thinner
Move lever to select desired thickness.
Finger grip
thicker
19
7/2/13 3:31 PM