Installing/Removing The Prep Bowl - KitchenAid 5KFP1644 Instruction Manual

usIng Your AccessorIes

Installing/removing the prep bowl

note: The prep bowl can be used only with the discs and the dicing kit.
To use the prep bowl, place into the
1
work bowl using the two finger grips.
Place the desired disc on the power
3
shaft. Do not use any blades with the
prep bowl.
After processing, remove the prep bowl
5
using the two finger grips.
IMPortAnt: Discs and adapters must be removed before removing bowls.
W10547908A_Translation.indd 17
Place the adapter on the power shaft.
2
Install the lid, aligning the tabs and
4
locking it into place.
17
7/2/13 3:31 PM