Download  Print this page

Installing/removing The Slicing Disc; Adjusting The Slicing Thickness - KitchenAid KFP1642CA Instructions Manual

Use & care guide.
Hide thumbs

Advertisement

Table of Contents
USINg YOUR ACCESSORIES

Installing/removing the slicing disc

Place the disc on the power shaft.
1
Install the work bowl lid, aligning
3
the tabs and locking it into place.

Adjusting the slicing thickness

NOTE: Changing thickness settings with
other discs or blades installed will have no
effect on operation.
Be aware, it is possible to change the thickness
of your slices by changing pressure on the food
item when guiding it into the feed tube. Use
more pressure for a thicker slice, or use less
pressure for a thinner slice.
IMPORTANT: Discs and adapters must be removed before removing bowls.
20
Slightly rotate the disc until it drops
2
into place.
Finger grip hole
To remove slicing disc, remove work
4
bowl lid and using the 2 finger grip
holes, lift the disc straight up.
Thinner
Move lever to desired thickness setting.
Finger grip hole
Thicker

Advertisement

Chapters

Table of Contents

This manual is also suitable for:

Kfp1344caKfp1642

Comments to this Manuals

Symbols: 0
Latest comments: