Parts Namee - Sharp DW-E16FA Operation Manual

PARTS NAME
MAIN UNIT AND CONTROL PANEL
Control Panel
ODOR Indicator Light (green, orange, red)
Indicates the cleanness of the room by color.
Clean
Green:
(Lighting)
Dirty
Red:
(Lighting)
CURRENT HUMIDITY display
Displays the current humidity (estimate).
............ 31% or below
Current humidity (est.)
－ ...
displayed in the unit of 1%.
............
91% or above
Plasmacluster Ion ON/OFF button
(Also used as a CHILD LOCK ON/OFF button)
E - 19
Plasmacluster Ion indicator light (blue)
Lighting...Plasmacluster Ion is running
Front View
Casters
(four)
Moves the product
left and right.
E - 8
CHILD LOCK indicator light (green)
E - 19
Lighting...Child Lock is enabled
E - 14,15,17
FAN SPEED button
Changes the fan speed.
FAN SPEED indicator light (green)
Displays the fan speed in the current operation.
Louver (Air outlet)
E - 18
Water tank
E - 20,24
Drain outlet
Tank lid
Float
Do not take off the
expanded polystyrene.
(Otherwise, the sensor
does not detect filling of
the tank.)
Water level window
Tank knob
Tank handle
POWER/MODE button
E - 14~17
Switches the operation mode.
POWER/MODE indicator light (green)
Displays the operation status.
The AIR PURIFYING indicator light is turned on.
in all operation modes.
Back View
HEPA filter
Active Carbon
Deodorizing filter
Rear panel
(Pre-filter)
Air inlet
Continuous
Do not block the air inlet.
drainage hole
(Rubber cap)
OFF TIMER button E - 18
Sets the operation time for the OFF TIMER.
OFF TIMER indicator light (green)
Displays the set time for the OFF TIMER.
14
Tank FULL indicator light (red)
E - 20
Blinking......The water tank is full
OFF button
E - 17
Stops the operation.
V.SWING button
E - 18
Switches the vertical swing mode
of the louver.
V.SWING indicator light (green)
Displays the swing status.
Sensor (inside)
(Odor sensor)
Handle (both sides)
E - 13
Sensor (inside)
(Temperature and
humidity sensor)
Power cord
Power plug
E - 9