Worx WU302 Manual page 5

Additional safety points for your
drill
1 Remove the plug from the socket before carrying out any adjustment,
servicing or maintenance.
2 Fully unwind cable drum extensions to avoid potential overheating.
3
When an extension cable is required you must ensure it has the
correct ampere rating for your power tool and that it is in a safe
electrical condition.
4
Ensure your mains supply voltage is the same as your tool rating plate
voltage.
5
Your tool is double insulated for additional protection against a
possible electrical insulation failure within the tool.
6
Always check walls and ceilings to avoid hidden power cables and
pipes.
7
After long working periods, external metal parts and accessories
could be hot.
8
Wear eye protection when operating this tool.
9
Wear ear protectors with impact drills. Exposure to noise can
cause hearing loss.
10
Use auxiliary handles supplied with the tool. Loss of control can
cause personal injury.
11
Hold tool by insulated gripping surfaces when performing an
operation where the cutting tool may contact hidden wiring.
Contact with a 'live' wire will also make exposed metal parts of the
tool'live'and shock the operator.
Symbols
Read the manual
Warning
Wear safety goggles
Wear dust mask
Wear ear protection
Double insulated
WEEE marking
5