Printer Driver Settings - Brother TD-2120N TD-2130N TD-2120NW User Manual

j
In order to remove any slack in the roll,
lightly pull on the paper fed out of the
liner exit until no more can be pulled out.
k
Press the (Power) button to turn the
printer on.
NOTE
If the paper size information for the die-cut
labels being used has been registered
with the printer, pressing the
button will position the label at the correct
starting position. For details, see
Registering Paper Size Information With
the Printer on page 9.
 When printing without using the peeling
function
Receipt paper can be installed normally,
and printing can be performed without
using the peeling function, even if the label
peeler is installed.
For details on loading paper, see Inserting
the RD Roll on page 15.
NOTE
When inserting receipt paper, do not feed
the paper through the liner exit.
Using the Label Peeler (Optional:PA-LP-001) (TD-2120N/2130N only)
(Feed)

Printer Driver Settings

a
Display the printer's [Printing
Preferences] dialog box.
®
Windows XP

Click [Start] - [Control Panel] -
[Printers and Other Hardware] -
[Printers and Faxes], right-click the
printer whose settings are to be
changed, and then click [Printing
Preferences].
 Windows Vista
Click - [Control Panel] -
[Hardware and Sound] - [Printers],
right-click the printer whose settings
are to be changed, and then click
[Printing Preferences].
®
 Windows 7
Click - [Devices and Printers],
right-click the printer whose settings
are to be changed, and then click
[Printing Preferences].
®
 Windows 8
Click [Control Panel] in the [Apps]
screen - [Hardware and Sound] -
[Devices and Printers], right-click
the printer whose settings are to be
changed, and then click [Printing
Preferences].
13
®
109
13