Removal Of Assembly Of Front Panel Mechanism - Daikin FTXG25CVMAW Service Manual

Indoor Unit
1.3

Removal of Assembly of Front Panel Mechanism

Procedure
Step
Remove the front grille.
1. Remove the assembly of
front panel mechanism.
The back of the front
1
grilles
2 Loosen the 2 screws of
the assembly (left).
3 Remove the assembly.
4 Lift the shaft and pull it
out to the rightward.
120
Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Procedure
Si04-402A
Points
When reassembling, insert
the lower rack plate first.
Pay attention so as not to
lose the drive gear.
Removal Procedure