TRENDnet TFC-1000S10D3 Specifications

1000mbps tx to 1000base-fx single-mode fiber converter

Hide thumbs Also See for TFC-1000S10D3:

Download this manual

FEATURES

• Compliant with IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX Standards

• Provides Dip Switch for Fiber (Auto/Manual), LLR (Enable/Disable)

• Support LLCF (Link Loss Carry Forward, Link Pass Through)

• Supports LLR (Link Loss Return) for FX Port

• Supports Full-Duplex and Auto-Negotiation Mode for Fiber Port

• Hot Pluggable & Wall-Mountable

• Optional 19" System Chassis (TFC-1600) holds up to 16 Media Converters

• 5-year limited warranty

TEW-503PI (07-28-2005)

1000Mbps TX to 1000Base-FX Single-Mode

Fiber Converter

TFC-1000S10D3/D5

TFC-1000S10D3 or TFC-1000S10D5 Bi-Directional Single-Fiber

Media Converter transforms 1000Base-TX UTP/STP media to

1000Base-FX media and vice versa. It provides DIP switch for

duplex mode, auto negotiation or speed management control. This

converter will give your Switch/Hub the ability to interface with fiber

connection over a distance up to 10 km.

fiber

TFC-1000S10D3/D5

rev: 07. 1 9.2010

Need help?

Do you have a question about the TFC-1000S10D3 and is the answer not in the manual?

Page 1 fiber 1000Mbps TX to 1000Base-FX Single-Mode Fiber Converter TFC-1000S10D3/D5 TFC-1000S10D3 or TFC-1000S10D5 Bi-Directional Single-Fiber Media Converter transforms 1000Base-TX UTP/STP media to 1000Base-FX media and vice versa. It provides DIP switch for duplex mode, auto negotiation or speed management control. This converter will give your Switch/Hub the ability to interface with fiber connection over a distance up to 10 km.
Page 2: Specifications
1-888-326-6061 TRENDnet is a registered trademark. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDnet products and is subject to change at any time, without notice. For the most recent product information please visit http://www.trendnet.com.

Tfc-1000s10d5