Connecting Cables - Eizo RadiForce MX191 Instructions For Use Manual

Connecting Cables

Note
• Check that the monitor and the PC are powered off.
• When replacing the current monitor with a MX191 monitor, be sure to change the PC settings
for resolution and vertical frequency to those which are available for the MX191 monitor referring to
the resolution table (back of cover page) before connecting the PC.
Tips
• When connecting two PCs to the monitor, refer to the User' s Manual on the CD-ROM.
1
Connect the monitor to the PC with a signal cable that matches the connectors.
After connecting the cable connectors, tighten the screws of the connectors to secure the coupling.
2
Connect the USB cable when using RadiCS LE or ScreenManager Pro for
Medical.
Connecting to the Monitor
3
Plug the power cord into a power outlet and the power connector on the monitor.
4
Press to turn on the monitor.
The monitor's power indicator lights up blue.
5
Turn on the PC.
The screen image appears.
When turning on the monitor and PC for the first time with the analog signal, the Auto
Adjustment function works to adjust the clock, phase, and display position automatically.
If an image does not appear, refer to "No-Picture Problem" (page.6) for additional advice.
Note
• Turn off the monitor and PC after using them.
• For the maximum power saving, it is recommended that the Power button be turned off. Unplugging
the power cord completely shuts off power supply to the monitor.
DD300
Digital connection
or
Analog connection MD-C87
option
Connecting to a Computer
3