Chapter 7 Using Snmp; Enabling Snmp; In This Chapter Enabling Snmp - Raritan EMX2-888 User Manual

Chapter 7

Enabling SNMP

Using SNMP
This SNMP section helps you set up the EMX for use with an SNMP
manager. The EMX can be configured to send traps or informs to an
SNMP manager, as well as receive GET and SET commands in order to
retrieve status and configure some basic settings.
In This Chapter
Enabling SNMP .....................................................................................298
Configuring Users for Encrypted SNMP v3 ...........................................299
Configuring SNMP Notifications ............................................................300
SNMP Gets and Sets ............................................................................305
By default, SNMP v1/v2c is enabled on the EMX so the EMX can
communicate with an SNMP manager. If you have disabled the SNMP, it
must be enabled to communicate with an SNMP manager.
Note that read-only access is enabled and the community string is public.
To enable SNMP:
1. Choose Device Settings > Network Services > SNMP. The SNMP
Settings dialog appears.
298