Shure SCM810 User Manual page 5

The rear-panel DIP switch provides the following setup op-
tions. The positions shown in bold type are the factory settings.
Switch Manual/Auto
Function
Switch Position 1
Number
Switch Up Auto
Switch Down Manual
Manual/Auto: Automatic activation is defeated in the Manual
position. In Manual mode, the SCM810 functions as a stan-
dard 8x1 mixer.
Last Mic Lock-On: Last Mic Lock-On feature keeps the most
recently activated microphone turned on until a newly acti-
vated microphone takes its place. When defeated, micro-
phones turn off after their preset hold time.
Hold Time: Adjusts the time an activated microphone (which
is not locked on) remains on after the talker stops talking. Set-
tings are 0.4 seconds or 1.0 second.
DIP SWITCHES
(MIXER
REAR
PANEL)
1 2 3 4 5 6 7
MODIFIABLE FUNCTION SWITCHES
FIGURE 3
DIP SWITCH SW702 FUNCTIONS
Last Mic Hold Time
Lock-On
2 3
On 0.4 second
All mics off after 1.0 second
hold time
5
NOTE: Switch positions and effects are shown in Figure 3
and also on the mixer label.
DIP
SWITCH
SW702
Off-Attenuation
Level
4
5 Up
6 Up
5 Down
6 Up
15 dB
5 Up
6 Down
5 Down
6 Down
(completely
off)
Off-Attenuation: Changes the off-attenuation level from 15
dB to infinity ( ). With the 15 dB setting, an unused micro-
phone is 15 dB lower in level than when it is activated. With the
setting, an unused microphone is completely off.
Limiter Threshold: Changes the output limiter threshold. Set-
tings are OFF (factory setting), +16 dBm, +8 dBm, or +4 dBm
(see Internal Modifications for other threshold settings).
Link Global/Local: Determines whether each linked SCM810
output contains only its own program output, or that of all linked
mixers (see Mixer Linking for more information).
Limiter Link
Threshold Local/Global
5,6 7
= Limiter off
= +8 dBm
Global
= +16 dBm
= +4 dBm
Local