Shure SCM810 User Manual page 3

Automatic microphone mixer

Hide thumbs Also See for SCM810:

FRONT-PANEL CONTROLS, CONNECTORS, INDICATORS (see Figure 1)

1. Microphone Channel Gain Controls 1 - 8: Allows adjust-

ment of microphone gain.

2. Input LED 1 - 8: Lights green when channel is active; lights

red at 6 dB below clipping level.

3. Low-Cut Filter 1 - 8: Recessed screwdriver adjustment

provides adjustable low-frequency rolloff (high pass) to re-

duce undesirable low-frequency signals.

4. High-Frequency Shelving Filter 1 - 8: Recessed screw-

driver adjustment provides level boost or cut in mid/high-fre-

quency region for compensation of off-axis lavalier micro-

phones, or for cutting the high-frequency sibilance of vocal

microphones.

5. AUX Level Control: Sets the input level for aux-level equip-

ment connected to the adjacent

or rear-panel

-inch AUX input.

6. Aux INPUT

-inch Phone Jack: Mixes external auxiliary-

or line-level sources, i.e., tape recorders, into output. This

out is not automatic. Signal appears at output of all linked

mixers.

7. MASTER Level Control: Determines the overall mix level.

8. Output Level Meter: Nine-segment LED meter indicates

peak output signal level. Last LED indicates limiter action.

9. PHONES Control and

itoring of mixer output through headphones. PHONES con-

trol determines headphones output level.

10. POWER LED: Lights green when unit is powered.

-inch phone jack INPUT

-inch Phone Jack: Permits mon-

Scm810e