C&K systems SYS3316RF Installation Instructions Manual page 12

SYS3316RF Installation Manual
Command Locations 11 - 13: Receiver #2 Phone Number Command Locations 11 - 13: Receiver #2 Phone Number Command Locations 11 - 13: Receiver #2 Phone Number Command Locations 11 - 13: Receiver #2 Phone Number Command Locations 11 - 13: Receiver #2 Phone Number
Order in which the numbers will be dialed Order in which the numbers will be dialed Order in which the numbers will be dialed
Order in which the numbers will be dialed Order in which the numbers will be dialed
Command Location 11 Command Location 11
Command Location 11 Command Location 11 Command Location 11
(1) (2)
Command Location 11: Receiver #2 Phone Number (digits 1 - 6) Command Location 11: Receiver #2 Phone Number (digits 1 - 6) Command Location 11: Receiver #2 Phone Number (digits 1 - 6)
Command Location 11: Receiver #2 Phone Number (digits 1 - 6) Command Location 11: Receiver #2 Phone Number (digits 1 - 6)
Digit Positions (1) - (6): Digit Positions (1) - (6):
Digit Positions (1) - (6): Digit Positions (1) - (6): Digit Positions (1) - (6):
0 - 9 = dialing digits
0 = dial tone detect
2 = * (DTMF dialing only, not used in pulse dialing)
3 = # (DTMF dialing only, not used in pulse dialing)
4 = end of number
5 = 5 second delay
Command Location 12: Receiver #2 Phone Number (digits 7 - 12) Command Location 12: Receiver #2 Phone Number (digits 7 - 12) Command Location 12: Receiver #2 Phone Number (digits 7 - 12)
Command Location 12: Receiver #2 Phone Number (digits 7 - 12) Command Location 12: Receiver #2 Phone Number (digits 7 - 12)
Command Location 13: Receiver #2 Phone Number (digits 13 - 18) Command Location 13: Receiver #2 Phone Number (digits 13 - 18)
Command Location 13: Receiver #2 Phone Number (digits 13 - 18) Command Location 13: Receiver #2 Phone Number (digits 13 - 18) Command Location 13: Receiver #2 Phone Number (digits 13 - 18)
Command Locations 14 - 16: RPS Phone Number Command Locations 14 - 16: RPS Phone Number Command Locations 14 - 16: RPS Phone Number Command Locations 14 - 16: RPS Phone Number Command Locations 14 - 16: RPS Phone Number
Command Location 14: RPS Phone Number (digits 1 - 6) Command Location 14: RPS Phone Number (digits 1 - 6) Command Location 14: RPS Phone Number (digits 1 - 6) Command Location 14: RPS Phone Number (digits 1 - 6) Command Location 14: RPS Phone Number (digits 1 - 6)
Command Locations 14 - 16 store the RPS Phone
Number used by the the COMMANDER II Remote
Programming Software. For additional information on
programming these Locations, refer to Receiver #2 above.
Command Location 15: RPS Phone Number (digits 7 - 12) Command Location 15: RPS Phone Number (digits 7 - 12)
Command Location 15: RPS Phone Number (digits 7 - 12) Command Location 15: RPS Phone Number (digits 7 - 12) Command Location 15: RPS Phone Number (digits 7 - 12)
Command Location 16: RPS Phone Number (digits 13 - 18) Command Location 16: RPS Phone Number (digits 13 - 18) Command Location 16: RPS Phone Number (digits 13 - 18)
Command Location 16: RPS Phone Number (digits 13 - 18) Command Location 16: RPS Phone Number (digits 13 - 18)
NOTE: In order to utilize the Remote Programming
feature, CL 0B, Digit Positions (3) and (4) must
also be programmed with YES.
(3) (4) (5) (6) (1)
Default Values Default Values
Default Values Default Values Default Values
Default Values Default Values Default Values Default Values Default Values
Default Values Default Values
Default Values Default Values Default Values
Default Values Default Values Default Values
Default Values Default Values
Default Values Default Values Default Values Default Values Default Values
Default Values Default Values
Default Values Default Values Default Values
Command Location 12 Command Location 12
Command Location 12 Command Location 12 Command Location 12
(2) (3) (4) (5) (6)
E
1 1 1 1 1 1 1 1 1 1
(1)
Digit (1) is dialed first.
You must place a
Fill in remaining positions with "0". The zeroes will not be
dialed.
0
1 1 1 1 1 2 2 2 2 2
(1)
0
1 1 1 1 1 3 3 3 3 3
(1)
E
1 1 1 1 1 4 4 4 4 4
(1)
0
1 1 1 1 1 5 5 5 5 5
(1)
0
1 1 1 1 1 6 6 6 6 6
(1)
12 12 12 12 12
Command Location 13 Command Location 13
Command Location 13 Command Location 13 Command Location 13
(1) (2) (3) (4) (5)
0 0 0 0
(2) (3) (4) (5)
4 (EON) after the last digit to be dialed.
0 0 0 0
(2) (3) (4) (5)
0 0 0 0
(2) (3) (4) (5)
0 0 0 0
(2) (3) (4) (5)
0 0 0 0
(2) (3) (4) (5)
0 0 0 0
(2) (3) (4) (5)
CL 11 - 16 CL 11 - 16 CL 11 - 16
CL 11 - 16 CL 11 - 16
(6)
0
#
(6)
0
#
(6)
0
#
(6)
0
#
(6)
0
#
(6)
0
#
(6)